Home
Company Profile
Product Range
Conditions of Sale
Contact Us
 
Products
:.Cork Sheet & Gaskets
:.Flange Insulation Kits
:.Garlock Gasket Products
:.Gore-Tex® Expanded PTFE
:.Graphite Products
:.James Walker Products
:.Metal Ring Type Joints
:.Metal Shims & Components
:.Non-Asbestos Jointing
:.O-Rings
:.Packing Products
:.PTFE Products
:.Rubber Mouldings
:.Rubber Sheet & Gaskets
:.Sampson Cut Gaskets
:.Sampson Exchanger Gaskets
:.Spiral Wound Gaskets
James Walker Products
Official stockist for
James Walker Products
 
Packing Products
Pan Fibre | Kevlar Aramid Fibres | Graphited Aramid | PTFE | PTFE Graphite | Glass Fibre | Glass-Ceramic Braids | Natural Fibres | Special Packing
CARBON GRAPHITE FIBRES
TYPE VG4
Service Capability
Pressure Rating: 300bar Rotary Speed: 20m/s pH range: 0 - 14
Temperature: up to 427°C in oxidising environments
Temperature: up to 2760°C in inert environments
 
Product Information
Type VG4 is a 100% pure Graphite packing which is capable of near universal application. VG4 is inter-braided from pure Graphite yarn impregnated fibre by fibre with pure Graphite powder. The Graphite powder increases the natural sealing effect of the Graphite yarns and acts as a surface lubricant to produce a virtually non- scoring packing.

Graphite fibre is superior to any other yarn in the degree to which it combines outstanding packing properties, namely; excellent thermal conduction, smooth running, near universal chemical resistance and extreme temperature capability. The use of Type VG4 pure Graphite fibre packing provides the opportunity to extend the use of the packed gland into extreme areas of speed, temperature and chemical resistance. In more normal applications, the quality of Type VG4 will result in maintenance savings many times in excess of the actual packing cost.

Applications
For pumps and valves in extreme conditions or where the value of the best quality packing can be realised. Universal chemical resistance (sole exceptions are fuming nitric acid, oleum, aqua regia and fluorine.)
Suitable and certified for use in nuclear power plants.
Percentage of soluble chloride is less than 50 ppm.

 
 
TYPE VG41
Service Capability
Pressure Rating: 250bar Rotary Speed: 1m/s pH range: 0 - 14
Temperature: up to 427°Cin oxidising environments
Temperature: up to 2760°C in inert environments
 
Product Information
Type VG41 is 100% pure Graphite packing suitable for near universal static application. Type VG41 is inter-braided from pure Graphite yarn with Inconel wire reinforcement. The Inconel wire greatly increases the mechanical strength of the Graphite packing to enhance its use in the most severe of valve sealing applications.

Specification of Type VG41 pure Graphite Inconel wire re-inforced pocking can extend the use of packing in valves to the ultimate in temperature, chemical resistance and sealing integrity. Being pure Graphite, VG41 will not dry out nor harden in use.

Applications
Maximum performance valve packing providing the ultimate in braided packing for sealing integrity, capability and safety. For use in any static application where quality is paramount particularly in the nuclear and power generating industries.
Universal chemical resistance as per Style VG4.
Suitable and certified for use in nuclear power plants.

 
 
TYPE VC5/51
Service Capability
Pressure Rating: 200bar Rotary Speed: 15m/s
Temperature: -150+350°C pH range: 3 - 12
 
Product Information
VC5 is square-braided from high quality Carbon yarns impregnated with pure Graphite, special high temperature lubricants and Molybdenum Disulphide. The Carbon yarns are dense braided to provide a near frictionless, self-lubricating seal. Graphite powder provides non-migrating lubrication between the packing and the shaft. The non-glazing, high temperature lubricant protects during the pocking break-in period. The addition of Molybdenum Disulphide gives high temperature and high pressure lubrication with shaft wear protection even when contact pressures between packing and shaft are excessive.

Type VG5 Carbon fibre packing is swift to break-in because of its low friction, lubricant intensive constituents and these characteristics allow its extended life in arduous duties. Type VC5 can be used in services where many other lubricated fibre packings fail, due to migration or loss of lubrication and consequent fibre burning, hardening or glazing.

Type VC51 is Inconel Wire re-inforced for high pressure static applications to 350 Bar to give an exceptional capability, performance and lasting value packing for use up to 1 m/s.

Applications
VC5 is ideal as a rotary duty, multi-service, packing particularly for boiler feed applications.

 
Pan Fibre | Kevlar Aramid Fibres | Graphited Aramid | PTFE | PTFE Graphite | Glass Fibre | Glass-Ceramic Braids | Natural Fibres | Special Packing
Please contact our sales office for further information
Disclaimer - The information contained herein is given in good faith. No liability will be accepted in relation to the same. Sampson Gaskets Limited exclude all conditions or warranties, express or implied as to their products and/or their fitness for any particular purpose

Unit 22, Leigh Road, Haine Industrial Estate,
Ramsgate, Kent CT12 5EU England
 
Contact Us

HEAD OFFICE & FACTORY

Telephone:
(01843) 854800
(08700) 349990

Fax:
(01843) 854801
(08700) 349991

Email:
UK Sales -click here
Export Sales -click here

NORTHERN OFFICE

Telephone:
(01924) 886450

Fax:
(01924) 886457

Email:
Northern Sales -click here

© 2007 Sampson Gaskets Limited Wesite designed and hosted by Supersys